MK SERIES SELECTION CONFIGURATION
●Tool magazine
●Full closed-loop grating ruler
●Right angle milling head
●FANUC system/or other systems
| Project | Unit | ModeL | ||
| MK110 | MK130 | |||
| Workbench | Workbench dimensions (L × W) | mm | 1000×1200 | 1400×1600 |
| Maximum load of worktable | kg | 5000 | 9000 | |
T-slot (slot width) | mm | 22 | 28 | |
Positioning hole | mm | Φ60H7 | Φ80H7 | |
Workbench rotation mode | / | 4×90°(Automatic conversion) | 4×90°(Automatic conversion) | |
| Coordinate range | Table left and right stroke (X1 axis) | mm | 1500 | 1900 |
| Table stroke forward and backward (Y1 axis) | mm | 900 | 900 | |
Workbench front and rear travel (Z-axis) | mm | 700 | 1000 | |
Boring shaft axial travel (W-axis) | mm | 600 | 700 | |
| Spindle | Spindle diameter | mm | φ110 | φ130 |
| Spindle hole taper | / | BT50 | BT50 | |
| Spindle speed | Nm | 447 | 605 | |
Maximum resistance of the spindle | N | 18000 | 18000 | |
Spindle speed | r/min | 20~1500 | 20~1500 | |
Reasonable maximum boring diameter of boring shaft | mm | Φ240 | Φ300 | |
Reasonable maximum drilling diameter of boring shaft | mm | Φ50 | Φ60 | |
| Transmission mode | / | Belt drive | Belt drive | |
Cutting feed speed (X/YIZW) | m/min | 6/6/6/2 | 6/6/6/2 | |
| Electric machinery | Maximum power of spindle motor | kW | 22 | 30 |
| Precision | Positioning accuracy (X/YIZ) | mm | 0.04/0.032/0.032 | 0.04/0.032/0.032 |
| Repeated positioning accuracy(X/YIZ) | mm | 0.023/0.023/0.02 | 0.023/0.023/0.02 | |
| System | CNC system | / | SIEMENS 828D | SIEMENS 828D |
| Power source | Power supply | KVA | ≥ 30 | ≥ 50 |
| Air pressure | Air demand | kg/cm2 | ≥ 6 | ≥ 6 |
| Air source flow | m3/min | ≥ 0.5 | ≥0.5 | |
Machine tool Size | Floor area (L × W × H) | mm | 3500×4200×3100 | 6200×4000×3100 |
| Machine weight (approx.) | kg | 11500 | 21000 | |
400-881-5651
Wechat
